階梯鋼網厚度直觀測量；
規格參數：
全自動鋼網檢測機參數表 | ||||
序號 SN | 類型 Type | 項目 Item | 興華煒 Sinhovo | |
| 1 | 品牌 Brand | 研發時間 Time to market | 2011年世界首創 The world's first in 2011 | |
| 2 | 檢測規格 Inspection specification | 型號名稱 Model | SG830 | |
| 3 | 型號說明 | 1200萬像素 高配 12 million pixel | ||
| 4 | 檢測用途 Inspection purpose | 新鋼網開口精度、質量檢測、舊鋼網清洗效果檢測、異物檢測、張力測量、鋼網精度對比等 New Stencil opening accuracy, quality inspection, old Stencil cleaning effect detection, foreign object detection, tension measurement, Stencil precision comparison, thickness measurement | ||
| 5 | 檢測項目 Inspection content | 位置、尺寸、數量、異物、張力、毛刺、多孔 Position, size, precision, foreign body, tension, burr, porous | ||
| 6 | 整板多開孔檢查 Full board multi-hole inspection | 檢查整板多開孔 Full plate multi-hole inspection | ||
| 7 | 檢測速度 inspection speed | 0.7~1.2s/FOV | ||
| 8 | 檢查精度 Inspection accuracy | 尺寸測量精度 Dimensional measurement accuracy | 3.45~6.9μm (相同FOV內解析度：0.345um) 3.45~6.9μm (within the same FOV resolution: 0.345um) （一個像素尺寸） | |
| 9 | 面積測量精度 Area measurement accuracy | <1%，GR&R<5% | ||
| 10 | 位置精度 Position accuracy | GR&R<5%，光柵尺分辨率±1μm、定位精度：±5μm GR&R<5%、 grating scale resolution ±1μm、positioning accuracy:±5μm | ||
| 11 | 定位采樣位置 Locate the sampling location | 運動結構末端采樣 Moving structure end sampling | ||
| 12 | 電機定位方式 Motor positioning mode | 絕對靜止后采樣 Absolute static sampling | ||
| 13 | 張力檢測 Tension detection | 高精度張力計，任意多位置測試 精度： ±1N.cm，張力范圍：0~60N~100N High-precision tensiometer, any multi-position inspection，Accuracy: ±1N.cm, tension range: 0~60N~100N 使用設備內部裝置校準和歸零（Calibrate and zero using equipment internal devices） | ||
| 14 | 最小檢測開口 Minimμm detection opening | 最高40μm * 40μm (by 3.45μm) Up to 40μm * 40μm (by 3.45μm) | ||
| 15 | 最小檢測間距 Minimum detection distance | 最高40μm | ||
| 16 | 最大檢測開口 Maximum detection opening | 最大 18mm * 7mm (by 6.9μm) | ||
| 17 | 最大檢測開口數量 Maximum number of detection openings | 120萬 1.2 million | ||
| 18 | 光學系統 Optical system | 相機 Camera | 1200萬像素相機(選配2500萬像素) 12 mega pixel camera（Optional 25 million pixels） | |
| 19 | 鏡頭 Lens | 定制雙側遠心光學鏡頭 Custom double-sided telecentric optical lens | ||
| 20 | 頂部光源 Top lighting | 環形LED頂光，同軸LED光源 Ring LED top light, coaxial LED light source | ||
| 21 | 底部光源 Bottom lighting | 高功率綠色同軸LED燈 High power green light coaxial LED light | ||
| 22 | 分辨率 Resolution | 3.45~6.9μm/pixel | ||
| 23 | 設備測量分辨率 Equipment measurement resolution | 0.2μm | ||
| 24 | 自動激光對焦、測距 Automatic laser focus, ranging | 自動激光對焦測距功能 Automatic laser focus ranging function | ||
| 25 | FOV尺寸 FOV size | 14.1*10.7mm(by 3.45μm)~28.2*20.7mm(by 6.9μm) | ||
| 26 | 鋼網規格 Stencil specification | 最大網框尺寸 Maximμm frame size | <740*740*50mm | |
| 27 | 最大測量范圍 Maximμm measurement range | 570*570mm | ||
| 28 | 設備規格 Equipment Specifications | 外觀尺寸（L*W*H）Dimensions | <1320*1510*1620mm | |
| 29 | 重量 Weight | 1300KG | ||
| 30 | 設備結構 Equipment structure | 全零零級大理石平臺，高精度測量保證 Full marble platform, guaranteed by high-precision measurement | ||
| 31 | 龍門結構 Gantry structure | 全零零級大理石平臺 Full marble platform | ||
| 32 | 傳動系統 Transmission system | 直線電機+3 光柵尺閉環控制、光柵尺分辨率±1μm Linear motor+3 Grating ruler closed-loop control、grating scale resolution ±1μm | ||
| 33 | 計算機 Computer | 操作系統 Operating system | Windows 7/10 X64 專業版 Windows 7/10 X64 Professional Edition | |
| 34 | 電腦、顯示器 Computer monitor | E5 至強、96G、4TB+500G SSD、4G顯卡、22' LCD E5 Xeon、96G、4TB+500G、4G Graphics card、22' LCD | ||
| 35 | 軟件功能 Software function | 編程方式 Programming mode | Gerber文件編程、CAD導入 Gerber file programming, CAD import | |
| 36 | Gerber file讀取時間 Gerber file read time | 20萬孔以內：3S | ||
| 37 | Gerber file操作響應時間 Gerber file operation response time | 20萬孔以內：0.3S | ||
| 38 | 編程時間 Programming time | 1萬孔以內：2～5分鐘 Within 10000 holes：2 to 5 minutes | ||
| 39 | 離線編程 Offline programming | 離線編程 Offline programming | ||
| 40 | 自動編程 Automatic programming | 具備自動編程及遠程自動編程功能 It has automatic programming and remote automatic programming functions | ||
| 41 | Gerber file | RS-274、RS-274X | ||
| 42 | 機種切換時間 Model switching time | 小于2分鐘，可按條碼/RF讀取程式 Less than 2 minutes, you can read the program by barcode/RF | ||
| 43 | 主要算法 Main algorithm | 通過MARK矯正計算坐標位置 用矢量圖像算法計算開口與實際Geber的幾何位置與尺寸差異等 Calculate coordinate position by MARK correction Calculate the geometric position and size difference between the opening and the actual Geber by vector image algorithm | ||
| 44 | 設備測試模式 Device inspection mode | 離線測試 Offline inspection | ||
| 45 | 特定功能 Special function | 開孔孔壁質量觀測 Open hole wall quality observation | 可提供手動微觀觀測 Microscopic observation | |
| 46 | 測試內容選擇 inspection content selection | 可根據A/R , W/T 參數選擇測試內容、參數 inspection content and parameters can be selected according to size, type, A/R, W/T parameters | ||
| 47 | 測試方式 inspection method | 多種檢測模式與測試級別設定 不同元件可分組分級別單獨定義和測試，包含面積、尺寸、位置、張力等 Multiple detection modes and inspection level settings Different components can be individually defined and inspectioned at the component level，Including area, size, position, tension, etc | ||
| 48 | 檢測數據庫 Detection database | 保存程式名稱、條碼、操作人員、開孔面積，尺寸、坐標、偏移量，張力數據、圖片等 Save program name, barcode, operator, opening area, size, coordinates, offset, tension data, images, etc. | ||
| 49 | 用戶權限 User rights | 可按客戶需求定義用戶權限級別 User privilege levels can be defined according to customer needs | ||
| 50 | 與公司內部系統串接 Connected to the company's internal system | 支持數據上傳，可按MES需求開放、定制數據接口、數據結構、通訊方式 Support data uploading, custom data interface, data structure, communication method as required | ||
| 51 | 鋼網條碼掃描功能 Stencil barcode scanning function | 通過掃描鋼網條碼讀取程式和管理數據 Reading programs and managing data by scanning steel mesh barcodes | ||
| 52 | 鋼網與PCB Gerber對比 Stencil Gerber contrast PCB Gerber function | 鋼網GERBER與PCB Gerber對比功能，可檢查鋼網GERBER正確性 Stencil GERBER and PCB Gerber comparison function to check the correctness of Stencil GERBER | ||
| 53 | 鋼網信息管理系統 Stencil information management system | 選配項目，可按要求修改與定制 Optional items,Can be modified and customized as required | ||
| 54 | 每片鋼網歷史記錄 Stencil history | 文件方式記錄測試過程和結果數據，且可離線查看測試結果 File mode records inspection process and result data, and can view inspection results offline | ||
| 55 | SPC 數據統計軟件 SPC data statistics software | 位置、面積、大小、SPC數據分析、匯總報告、CPK&Grr精度報告、散點圖、漲縮系數以及其他數據和圖表 Position,area, size, SPC data analysis, summary reports, CPK&Grr accuracy reports, scatter charts, expansion and contraction coefficients, and other data and charts | ||
| 56 | 設備需求 條件 Equipment demand condition | 電壓 Voltage | AC 220V±10%(單相), 50/60Hz，1000VA AC 220V ± 10% (single phase), 50/60Hz, 1000VA | |
| 57 | 氣壓 Air pressure | 0.4Mpa~0.55Mpa | ||
| 58 | 振動是否影響精度 Does vibration affect accuracy? | A級 50DB 以下振動不影響 Class A vibration below 50DB does not affect | ||
| 59 | 設備服務 Equipment service | 保修期限 Warranty period | 整機壹年保修 One year warranty | |
| 60 | 設備校正周期 Equipment calibration cycle | 一年一次或搬運設備后校正 Corrected after one year or after mobile device | ||
| 61 | 軟件升級服務 Software upgrade service | 標準測試軟件 終身免費升級 Standard software lifetime free upgrade | ||
| 62 | 服務支持 Service support | 7*24,4小時內響應 7*24, response within 4 hours | ||
| 63 | 備品倉庫 Spare parts warehouse | 深圳、蘇州、重慶備品倉庫 Shenzhen, Suzhou, Chongqing spare parts warehouse | ||
*因技術更新，以上參數可能與實際設備稍有差異，最終解釋權歸廠家所有。 * Due to technical updates, the above parameters may differ slightly from the actual equipment，The final interpretation right belongs to the manufacturer. | ||||
| 選配項目 | ||||
| 1 | 選配功能和配置項目 Optional functions and configuration items | 鋼網信息管理軟件系統 Stencil Information Management Software System | 可選配，可達到鋼網的全鏈信息數據化、智能化的軟件管理，并可按要求修改與定制 Optional, which can achieve data based and intelligent software management of the entire chain of information of the stencil and can be modified and customized as required | |
| 2 | 智能鋼網存儲管理柜 Intelligent stencil storage management cabinet | 可選配智能鋼網存儲管理柜，配合鋼網管理系統，對鋼網進行全智能化存儲和管理、記錄、追溯 An intelligent stencil storage and management cabinet can be selected to cooperate with the stencil management system to fully intelligently store, manage, record, and trace the stencil | ||
| 3 | 3D鋼網厚度測量 3D Stencil Thickness Measurement | 顯微直觀測量鋼網、階梯鋼網切面孔壁厚度 檢測分辨率：0.4μm，測量精度：±2μm; Microscopically measure the thickness and quality of the stencil and stepped stencil hole wall, and can directly observe the cross section of the opening Detection resolution: 0.4μm, measurement accuracy: ±4μm; | ||
| 4 | SECS GEM 系統對接 Secs gem system docking | SECS GEM 系統對接 Secs gem system docking | ||
| 5 | PCB焊盤采點、檢測功能 PCB pad sampling and detection function | 可針對PCB焊盤進行采點、尺寸、位置檢測與核對、調整，虛擬印刷技術核對GERBER文件和鋼網、PCB實物，在線掃描，離線完成 The PCB pad can be detected, checked and adjusted for the point, size, and position. The virtual printing technology checks the GERBER file, the stencil, and the actual PCB, scans it online, and completes it offline | ||
| 6 | 2500萬像素機型 25million pixel models | 選配2500萬像素，4.1um分辨率，21*21mm FOV，可檢測最小35μm 開孔，最小12μm 以上破損、多孔 Optional 25million pixel,4.1um resolution, 21*21mm FOV, can detect the minimum 35μm opening, the minimum 12μm or more damaged, porous | ||
| 7 | 大尺寸機型 Large size model | 可選配 支持1200*900*60mm以下網框，檢測范圍：780*980mm 更大尺寸產品需定制 Optional Support net frame below 1200*900*60mm, detection range: 780*980mm Larger size products need to be customized | ||
| 8 | 刮刀直線度檢查功能 Scraper straightness check function | 可選配 按刮刀型號、外形定制專用檢測治具 Optional special inspectioning fixture customized according to the model and shape of the scraper | ||
| 9 | 自動鋼網調寬、夾緊機構 Automatic stencil width adjustment and clamping mechanism | 可選配 自動鋼網調寬、夾緊機構 Optional Automatic stencil width adjustment and clamping mechanism 標配版本為自然放置鋼網模式，具備以下優點：1、可直接測量鋼網網框變形翹曲、2、可在自然狀態下測量張力、更符合IPC標準要求，3、具備張力計自歸零和校正功能、4、無需調整寬度來適應不同尺寸鋼網 Optional stencil automatic clamping rail function The standard version is the natural placement stencil mode, which has the following advantages: 1. It can directly measure the deformation and warpage of the stencil frame 2. It can measure the tension in the natural state 3. It has the self zeroing and correction function of the tensiometer 4. It does not need to adjust the width to adapt to different sizes of stencil | ||
| 10 | 鋼網變形掃描檢測 Stencil Deformation Scanning Detection | 掃描檢測鋼網網面變形、破損 Scanning detection of stencil deformation | ||
| 11 | 治具翹曲檢測 Fixture warpage detection | 定制 自動激光檢測治具平整度 Custom Automatic laser inspection fixture flatness | ||
| 12 | 網框平整度檢測 Flatness detection of frame | 定制 自動激光檢測網框平整度 Customized Automatic laser detection of the flatness of the mesh frame | ||
| 13 | 高精度校正玻璃板 High precision calibration glass block | 高精度校正玻璃塊，可自動按程式校正設備，玻璃板綜合精度<5um High-precision calibration glass block, can automatically calibrate the equipment according to the program, the comprehensive accuracy of the glass plate is less than 5um | ||
長按屏幕識別二維碼
打開手機掃描二維碼
